Filter colours and letters decoded
Gas filters are marked to EN 14387 and particle filters to EN 143. The letter says what the filter is approved against, the number is its class (capacity for gas, efficiency for particles), and each type has a colour band.
| Type | Colour | For use against | Other information |
|---|---|---|---|
| A | Brown | Organic gases and vapours, boiling point above 65 ºC | |
| AX | Brown | Organic gases and vapours, boiling point at or below 65 ºC | Single use only; no class number |
| B | Grey | Inorganic gases and vapours | Do not use against carbon monoxide |
| E | Yellow | SO2 and other acid gases | |
| K | Green | Ammonia and its organic derivatives | |
| Hg | Red & white | Mercury | Includes P3 particle filter; maximum use time 50 hours |
| NO | Blue & white | Oxides of nitrogen | Includes P3 particle filter; single use only |
| SX | Violet | Substance as specified by the manufacturer | |
| P | White | Particles (EN 143), classes 1 to 3 |
Source: Respiratory protective equipment at work: a practical guide (HSG53), Fourth edition, 2013, p45, Table 7 Filter types. Checked 2026-10-14.
“Table 7 Filter types”
About this source
Reading a marking
A number after a run of letters applies to all of them: ABEK1 is A1, B1, E1 and K1. P3 is the particle part. R means reusable for more than one shift and NR single shift only. Some makers add approvals after a plus sign, such as “+ formaldehyde”.
This decodes what a filter is approved against. It is not advice on which filter your work needs: that comes from your COSHH risk assessment, the substance's safety data sheet and the maker's instructions.